UNDERMOUNT DRAWER SLIDE ADJUSTMENT
If the drawers in your furniture become over weighted, or out of adjustment from transport, you can adjust the drawer slides in every direction.
To raise the drawer face upwards: Pull the drawer outwards and find the dark grey tabs on the front locking devices, located underneath the drawer face on either side, and move them towards the back of the case piece, thereby raising the drawer slightly. they can be moved independently.
To move the drawer left or right: Locate the roller wheels on the same drawer locking devices behind the drawer face. Roll them in the same direction to move left, oposite direction to move right.
To tilt the back of the drawer up or down to make the drawer face sit more evenly in the opening: Release the drawer from the drawer slides by pulling both spring loaded hand grips on the front locking devices outwards toward the side of the drawer, then slide the drawer away from the slides. At the back of each slide is a rotating dial that will raise or lower the drawer on that side by moving the dial tab left or right. When replacing the drawer, pull the drawer slide towards the drawer face until the slide locks into the locking device on both sides.
Side to side back of drawer adjustment: While the drawer is removed from the slides, locate the white dial on the back of the right slide. With a small slotted screwdriver, rotate the dial left or right to move the back of the drawer sideways either direction.